Tanks Inc. 32SS-S Ford 1932 Stainless Steel Fuel Injection Tank
Tanks Inc. 32SS-S Ford 1932 Stainless Steel Fuel Injection Tank
32SS-S Overall Size: 39" x 17" x 9" Stock 11 Gallon Capacity
Can be used for fuel injection or carburetion
INJECT YOUR CLASSIC HOTROD!!
Tanks, Inc. carries a wide veriety of fuel ready tanks with built in trays and appropriate fittings. These are original-fit tanks and require no modifications to mount.
This is the best choice for adding a fuel ready tank to your classic vehicle! Universal tanks are also available for totally custom applications.
Tanks Inc. now has EFI tanks for Ford 1932 . These powder coated tanks have the internal baffling necessary for today's EFI engines. With fuel pump options to supply up to 1000 horsepower!
Tanks has you covered for your next EFI swap
TANKS, INC. has been a leader in the street rod industry, receiving various awards for safety and innovation. In addition, it was the first to introduce style into street rod gas tanks; radiused edges, die-stamped openings, flush-mounted fittings, indented panels and slotted mounting flanges, just to name a few.
It was also the first on the block with a true reproduction Deuce tank, though many had tried and failed.
Their exclusive "Baffle-Tunnel" made polyethylene gas tanks a viable choice for the rodder. To top it off, the company holds three patents in the automotive field, two of them for gas tanks
Die-Stamped STAINLESS STEEL
- Reproduction of the Original Tank
- 18 gauge Stainless Steel 304 Grade
- Top Mounted Bolt In Pickup Tube and Vent (1/4" NPT Pickup & Return)
- Internal Reservoir Tray - Great for Carbs...Absolutely Necessary for Fuel Injection
- Stock Dimensions
- Stock 11 Gallon Capacity
- Overall Size: 39" x 17" x 9"
- Includes Non-Vented Cap
- Fully Baffled Fuel Tank
- Vented Tank
This tank has a bolt in pickup tube assembly for carburated applications. It will accept our optional GPA-series Fuel Pump kits as seen in our Fuel Pump Section for EFI applications.
In-Tank Fuel Pump Module - GPA-Series
- Made in the USA
- Heavy 10 gauge no-warp mounting plate
- 1/4" NPT Supply and Return Line
- Barbed Vent Fitting
- Oven brazed fittings
- 40-100 PSI
- In-tank wire harness
- Genuine Walbro Fuel Pumps
The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.
We use Walbro high-performance pumps in all of our fuel injection modules, and we offer four different operating ranges in order to supply up to approximately 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)
The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.
year make model | 1932 Ford |
---|---|
Manufacturer | TANKS INC. |