Steeroids 83830 Corvette 1955-62 Power Rack And Pinion Steering
 Steeroids 83830 Corvette 1955-62 Power Rack And Pinion Steering
Take Control Of Your Corvette!!
 Bolting on this kit will make a significant improvement in the overall drivability and responsiveness of your car.
 The first thing you will notice is the quicker ratio. Stock ratios usually yield between 3.5 or 4 turns lock to lock. That’s pretty slow. Autocrossing or just fast, mountain road driving becomes a chore with those ratios.Our roadrace kit yields about 2.75 turns lock to lock.
 Once you get used to the responsiveness of the steering you will notice that your car now drives exactly where you point it. Roll into a long sweeping corner and the steering wheel can be held in one position. No more of the constant adjustments just to keep the car in the lane.
 Suddenly your car is driving like a new car and I don’t mean when your car was new. I mean it drives like a 2000 model year car! (At least it steers like one, it won’t fix your stumbling carb or your soft brake pedal).
IMPORTANT THIS IS A BLACK STEERING COLUMN KIT !!
The kit comes complete with everything you need for installation. A power steering pump is included but you can use your stock pump.
 An interesting note, you can run the system without any power assist. Just leave the plugs in the in/out ports. Steering effort is about the same as the stock manual steering box. Installation is a straightforward process using simple hand tools. The only special tool you need is a pickle fork to remove the tie rods for the steering arm. The whole project takes 3 to 5 hours to complete.
If you really want a precise steering setup, a rack and pinion offers a 30-year leap forward in steering technology for your Chevy.Â
Nearly all new cars come equipped with rack and pinion steering. Most people have grown accustom to the feel of it because they drive modern cars to work every day. When you take the fun Chevy out for the weekend you are suddenly and quite literally placed in the 1960’s when steering was as vague as gas prices (nobody was very concerned about either). Even with all new components, do you find yourself sawing the wheel back and forth a little to keep it on the road?
Do you find that in the corners you have to chase the car to hold the line you want?Bolting on this kit will make a significant improvement in the overall drivability and responsiveness of your car. The first thing you will notice is the quicker ratio.
Stock ratios usually yield between 3.5 or 4 turns lock to lock. That’s pretty slow. Autocrossing or just fast, mountain road driving becomes a chore with those ratios. Steeroids yields about 2.75 turns lock to lock. Once you get used to the responsiveness of the steering you will notice that your car now drives exactly where you point it. Roll into a long sweeping corner and the steering wheel can be held in one position.
No more of the constant adjustments just to keep the car in the lane. Suddenly your car is driving like a new car and I don’t mean when your car was new. I mean it drives like a 2000 model year car! (At least it steers like one, it won’t fix your stumbling carb or your soft brake pedal).
The kit comes complete with everything you need for installation. A power steering pump is included but you can use your stock pump. An interesting note, you can run the system without any power assist. Just leave the plugs in the in/out ports. Steering effort is about the same as the stock manual steering box.
Installation is a straightforward process using simple hand tools. The only special tool you need is a pickle fork to remove the tie rods for the steering arm. The whole project takes 3 to 5 hours to complete.
Parts
BEARING BRACE, C1 - Rev C 1
Parts
DRIVERS SIDE BKT, C1 Rev. B 1
Parts
PASSENGER SID BKT, C1 REV B 1
Parts
RADIATOR SUPPORT, C1 1
Parts
TIE ROD BKT, C1 - REV C 1
Corvette 55-62
HOSE, braided rack set 1
Corvette 55-62
HOSE, braided reservoir supply to pump 1
Tie Rods and Tie Rod Ends
TIE ROD SLEEVE ASSY; 53-62 VETTE 18.5 IN 1
U-Joints from Borgeson
U-JOINT, ASSY 53-62 COR - ALUMINUM 1
Tie Rods and Tie Rod Ends More Info
Kit, Tie Rod Ends 1
Tie Rods and Tie Rod Ends
ROD END ASSY - 1 Rack & Pinion Units
R & P, POWER - 2.5 TURN 4517P NO CLAMPS 1
Rack Mounting Brackets
CLAMP, CORVETTE & MUSTANG, DRIVERS Rack Mounting Brackets
CLAMP, CORVETTE & MUSTANG, PASSENGER 1
Power Steering Pulleys
PULLEY, 5 INCH, 1 GROOVE TYPE II ALUM 1
Power Steering Pumps
PUMP, 53-62 CORVETTE- AL type II/TC 1
Power Steering Pumps
PUMP BRACKET - 53-62 CORVETTE 1
55-68 Corvette Steering Columns More Info
COLUMN 53-57 CORVETTE STEEL UNPAINTED 1
55-68 Corvette Steering Columns More Info
Column Wiring Kit, 53-62 Corvette 1
55-68 Corvette Steering Columns More Info
Steering Wheel Adptr, 53-62 Vette Polish 1
Parts
RESERVOIR - 53-62 CORVETTE 1
Other Components
INFO PACKET; 53-62 CORVETTE 1
Hardware And Fasteners More Info
KIT, METRIC RACK BOLTS WITH LOCK
| year make model | 1955 1954 1955 1962 corvette |
|---|---|
| Manufacturer | STEEROIDS |