IDIDIT 1070820040 Floor Shift Steering Column, 1965-66 Ford Truck, Retrofit Polished Aluminum Finish
Ididit 1070820040
Retrofit 1965-66 GM Style Ford Half-Ton Truck Tilt Floor Shift Steering Column - Polished Aluminum
Power And Performance You Can Feel!!
This retrofit column is designed to fit your Ford Half-Ton Truck and does NOT require modification to your original vehicle to install. Simply remove your old column, saving your original under dash mount and floor mount. Using an ididit installation kit, install your new steering column in place of the old.
Please Note: A stock Ford steering wheel WILL NOT bolt to the ididit GM Style Ford column. Requires an aftermarket steering wheel.
Ididit 1070820040
Better than stock replacements--ididit retrofit steering columns are designed to ensure a perfect fit and a flawless installation in your specific vehicle. The hot rod experts at ididit engineered these columns to fit in the factory location and, in many cases, will put your steering wheel back in its original location. Your column may include (depending on your application) 8-position tilt, self-canceling turn signals, 4-way flashers, a shaft, knobs, levers, and a wiring plug. Fitting your Ford, Chrysler, Chevy, or even Mopar classic with a perfectly planned aftermarket steering column is easier than ever, thanks to ididit retrofit steering columns.
Includes:
Column Length (in.): 32.25
Column Diameter (in.): 2 1/4
Column Lower Output Shaft: 3/4 in. 36-spline
Ignition Key Location: Dash
Tilt: Yes
Collapsible: No
Telescoping: No
Gear Indicator Included: No
Hazard Switch: Yes
Neutral Safety Switch Included: No
Turn Signal Switch Included: Yes
Column Material: Aluminum
Column Color: Polished
Quantity: Sold individually.
Notes: Installation kit sold separately. Uses original under dash and floor mount.
| year make model | 1965-66 Ford Truck |
|---|---|
| Manufacturer | IDIDIT |
| More Info | Use an ididit installation kit to install your new steering column in place of the old. Add an aftermarket wheel and the gripping surface of your new wheel will be in the same location as the original. |