Sanderson Headers ZoomieSBCDP Headers for Small Block Chevy
Sanderson ZoomieSBCDP Headers
for Small Block Chevy applications
Comes with individual baffles in each tube
Classic Dragster style header look
MADE IN THE USA
*THESE ARE CUSTOM BUILT HEADERS, PLEASE ALLOW APPROXIMATELY 4-6 WEEKS FROM DATE OF PURCHASE*
Sanderson Headers Zoomie for Small Block Chevy have our patented leak-free flange and include bolt-in baffles for street use. If it is the Classic Dragster look you are after, then these are the headers for you.
The Zoomie is available in standard length 16" for T-Buckets and 19" length for Highboys.
Demension A. 8 1/2
Demension B. 14 3/4
Engine : Small Block Chevy 262-400
Primary Tube Diameter : 1-7/8"
Weight : 35 Lbs / 15.9 Kg
16-Gauge Primary and Collector Tube Thickness
3/8" Thick Flange.
Patented Flange Design Requires NO Gaskets.
Tightest Fitting Header Available Anywhere.
Made in the USA
Header Bolt Set
Baffle Set (one for each tube)
Our Aluminized Ceramic Coating is available and RECOMMENDED on all Sanderson Headers. We apply a multi-layer inside and outside silver ceramic coating in-house to meet our high standards of quality, and polish the coated header to a high luster. This coating provides aerospace and military technology to your vehicle to control the heat in your engine bay, improve cylinder scavenging of exhaust gases, and increase the longevity of your header investment.
You can select Thermal Ceramic Coating and the header price and part number will be automatically updated.
Copper Collector Gaskets are recommended for all Sanderson Headers
Sanderson Headers do not include collector bolts due to our customers' wide range of preference. We do offer a collector bolt set that features Grade 8 Bolts with Locking Nuts
What is a D-Port?
We often see confusion in what is considered a D-Port cylinder head for small block Chevrolet engine applications. The problem originates in the technical understanding of what constitutes a true D-PORT versus a D-shape. The D-Port roof extends well above the centerline of the exhaust port, whereas the D-shaped port fits nicely inside what is deemed a standard port dimension. As shown in the graphic below, the d-shape easily fits within the common round or square port flange opening.
Where other header manufacturers use a typical flat header flange and gasket for sealing, the patented raised flange design of the Sanderson Headers requires different flanges for different small block Chevy exhaust port shapes. Other header flanges will often block the top of the exhaust port on D-port heads. When using a Sanderson D-Port flange the port is not blocked. However, using the wrong flange with a Sanderson header may expose open areas that will not seal, creating an exhaust leak.
- Using a D-port flange on a common GM head (standard round, square, or D-shaped port), the header port flange open is larger (taller opening) than the sealing area around the exhaust port (additional details below, comparing two BRODIX Track 1® cylinder heads)
- Using a standard Sanderson header flange on a D-port cylinder head has a similar problem, where the cylinder head exhaust port opening may extend above the raised flange sealing area, again creating the possibility of an exhaust leak.
Here is an example of a small block Chevrolet D-port cylinder head that requires the Sanderson D-Port header flange.
These headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser's responsibility to verify local regulations for compliance.
Wrapping your Sanderson Headers with ANY thermal tape voids your header warranty. The best thermal protection for your headers is our Aluminized Ceramic Coating that is available for every Sanderson Header.
Turnout tip, Finned Blockoff Plate, and Under Chassis adapters sold separately
If your engine is making pretty good horsepower - please call to add PowerCaps to your order.
Limited 5-Year Warranty
Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and service available in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option after inspection in our facility, any of our products which are found by us to have failed due to defects in either material or workmanship. This warranty is activated by the return of the Warranty Card enclosed with every pair of headers, and is effective for FIVE YEARS * from the date of purchase as indicated on the original invoice.
This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation and/or accident, or when used on applications for which they were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages, or for any other associated costs including the application of aftermarket coatings applied by others. Sanderson Street Rod headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.
|year make model||Small Block Chevy (265-400) V8|
T-Buckets CS, RP
1927-1929 cars and trucks CS, RP
1930-1931 cars and trucks CS, RP
1932-1934 cars and trucks CS, RP
CS = Standard Cross Steer; RP = Rack & Pinion