Dakota Digital BIM-01-2-J1939 CAN Interface Module

Name: Dakota Digital BIM-01-2-J1939 CAN Interface Module
SKU: BIM-01-2-J1939
Price: 133 USD
Availability: InStock

Be the first to review this product

Special Price $133.00 Regular Price $140.00

SKU

BIM-01-2-J1939

Dakota Digital BIM-01-2-J1939 CAN Interface Module

*The BIM-01-2-J1939 is designed to decode the information provided by the ECM and supply this information to the RTX, HDX, VHX and VFD3 systems with a black plastic control module.

The BIM-01-2-J1939 CAN(J1939/CAN) Interface allows you to wire into the CAN HI/LO harness, extracting engine and transmission data from the vehicle's computer (ECM). The BIM-01-2-J1939 will collect and output the following information to Dakota Digital Instrument Systems

Available on most vehicles (see below):***
Tachometer
Engine Temperature
Check Engine Indicator/ MIL
Vehicle specific:****
Speedometer
Oil Pressure
Intake Air Temperature
Transmission Temperature
Ambient Air Temperature
Gear Position
Fuel Pressure
Boost/ MAP
Air/Fuel Ratio
Fuel Level

Due to the various factory and modified ECM's, additional data including (Speed, Intake Temp, Transmission Temp, Ambient Air Temp, Oil Pressure, Fuel Pressure, Boost, Air/Fuel Ratio, Fuel Level and Gear Position) may be available, but will vary from application to application. Dakota Digital cannot guarantee the presence or accuracy of the Temperature, Pressure Air/Fuel Ratio, Fuel Level or Gear Position displays since this is a function of the ECM and matching OEM functional sensors.

*The BIM-01-2-J1939 is designed to decode the information provided by the ECM and supply this information to the RTX, HDX, VHX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity

**The BIM-01-2-J1939 is designed for J1939 CAN protocols only.
Compatible with Mercury Racing SBF, Cummins R2.8, BIGStuff EFI ECU, MAST Motorsports ECU and ECU's that are capable of sending J1939 CAN data

If you are concerned about compatibility with your vehicle please contact our sales or tech department.

More Information
year make model	The BIM-01-2-J1939 CAN(J1939/CAN) Interface allows you to wire into the CAN HI/LO harness, extracting engine and transmission data from the vehicle's computer (ECM).
Manufacturer	DAKOTA DIGITAL
More Info	This Bus Interface Module is designed to read engine information from the J1939 bus. The module is connected to the J1939 Bus through CAN bus-adapter harness to the CANH (RED WIRE) and CANL (BLACK WIRE) on the main harness. There are two interface (I/O) ports on the BIM-01-2-J1939 module. Either one can be connected to the instrument system or to another module, allowing several units to be daisy chained together. Cannot daisy chain with GPS-50-2. Do not connect the I/O port to anything other than a Dakota Digital control box or BIM. Do not mount the module in the engine compartment; as it should be mounted in the vehicle’s cabin. The engine information that is available from the unit depends on the ECU programming and add-ons. Readings this module monitors for: Vehicle speed, Engine RPM, Engine coolant temperature, Engine oil pressure, Engine light (MIL), Intake/manifold air temperature, Trans fluid temp, Fuel level, Ambient air temp, Fuel pressure, Air fuel Ratio, Gear and Boost. The engine and transmission information that is available from the unit depends on your ECU and add-ons.

Write Your Own Review

Dakota Digital BIM-01-2-J1939 CAN Interface Module

The BIM-01-2-J1939 CAN(J1939/CAN) Interface allows you to wire into the CAN HI/LO harness, extracting engine and transmission data from the vehicle's computer (ECM). The BIM-01-2-J1939 will collect and output the following information to Dakota Digital Instrument Systems

**The BIM-01-2-J1939 is designed for J1939 CAN protocols only. Compatible with Mercury Racing SBF, Cummins R2.8, BIGStuff EFI ECU, MAST Motorsports ECU and ECU's that are capable of sending J1939 CAN data

If you are concerned about compatibility with your vehicle please contact our sales or tech department.

This Bus Interface Module is designed to read engine information from the J1939 bus. The module is connected to the J1939 Bus through CAN bus-adapter harness to the CANH (RED WIRE) and CANL (BLACK WIRE) on the main harness.

There are two interface (I/O) ports on the BIM-01-2-J1939 module. Either one can be connected to the instrument system or to another module, allowing several units to be daisy chained together.

Cannot daisy chain with GPS-50-2.

Do not connect the I/O port to anything other than a Dakota Digital control box or BIM.

Do not mount the module in the engine compartment; as it should be mounted in the vehicle’s cabin.

The engine information that is available from the unit depends on the ECU programming and add-ons.

Readings this module monitors for:

Vehicle speed,

Engine RPM,

Engine coolant temperature,

Engine oil pressure,

Engine light (MIL),

Intake/manifold air temperature,

Trans fluid temp,

Fuel level,

Ambient air temp,

Fuel pressure,

Air fuel

Ratio,

Gear and Boost.

The engine and transmission information that is available from the unit depends on your ECU and add-ons.

**The BIM-01-2-J1939 is designed for J1939 CAN protocols only.
Compatible with Mercury Racing SBF, Cummins R2.8, BIGStuff EFI ECU, MAST Motorsports ECU and ECU's that are capable of sending J1939 CAN data