Dakota Digital BIM-19-2 Quad Air Pressure Module
Special Price $123.50 Regular Price $130.00
SKU
BIM-19-2
Dakota Digital BIM-19-2 Quad Air Pressure Module
The Dakota Digital BIM-19-2 Quad Air Pressure Module allows you to monitor 2- 4 bag pressures on your air ride system. Choose between a 4 corner, left and right or front and rear pressure system. Also available tank pressure reading.
*The BIM-19-2 is designed to and supply this information to the RTX, HDX, VHX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.
** The BIM-19-2 supersedes the BIM-19-1
Â
| Required Sender: | Range | Resolution | Low Warning | High Warning |
| SEN-03-9 | 0- 300psi | 1psi | 0- 250psi | 48- 300psi |
| year make model | The BIM-19-2 is designed to and supply this information to the RTX, HDX, VHX and VFD3 systems with a black plastic control module. |
|---|---|
| Manufacturer | DAKOTA DIGITAL |
| More Info | This Bus Interface Module has inputs for up to five solid state pressure sensors. Each input can be configure individually.
There are two interface (I/O) ports on the module. Either one can be connected to the gauge system or to another module, allowing several units to be daisy chained together.
Do not connect the I/O port to anything other than a Dakota Digital gauge or BIM. Do not mount the module in the engine compartment; it should be mounted in interior of the
vehicle. Each sensor connected to the bus needs a unique ID number assigned to it. This module has five inputs so it can use one, two, three, four, or five ID numbers.
The module is assigned an ID from 1 – 16 or turned off and will auto detect how
many sensors are connected and use additional ID’s as needed. The factory default ID numbers are 12 – 16 with all five sensors connected
Â
|
Write Your Own Review