Dakota Digital BIM-13-2 Wideband Air and Fuel Expansion Module

Name: Dakota Digital BIM-13-2 Wideband Air and Fuel Expansion Module
SKU: BIM-13-2
Price: 123.5 USD
Availability: InStock

Be the first to review this product

Special Price $123.50 Regular Price $130.00

SKU

BIM-13-2

Dakota Digital BIM-13-2 Wideband Air and Fuel Expansion Module

**BIM-13-2 Supersedes the BIM-13-1

IS YOUR HOTROD ADDICTED TO INFORMATION?1

Dakota Digital BIM-13-2 Wideband Air and Fuel Expansion Module

The Dakota Digital BIM-13-2 Wide Band Air/Fuel ratio monitor allows you to display the reading from almost any aftermarket wide band controller system. User-programmable to display in either as an air/fuel ratio or lambda display.

The BIM-13-2 is able to scale its output for use with nearly any Air/Fuel Controller available with a 0-5V output. Common brands of aftermarket Air/Fuel Controllers include Innovate Motorsports, NGK, FAST and AEM among others.

*The BIM-13-2 is designed to supply this information to the VHX, HDX, RTX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.

**BIM-13-2 Supersedes the BIM-13-1

More Information
year make model	*The BIM-13-2 is designed to supply this information to the VHX, HDX, RTX and VFD3 systems with a black plastic control module.
Manufacturer	DAKOTA DIGITAL
More Info	This Bus Interface Module has one input to monitor the air/fuel ratio output from a wide band air/fuel controller with an analog voltage output. It is programmable to provide either an air/fuel ratio display or a lambda display. The module can be programmed to work with different scaling values of a voltage between 0 – 5 volts. This allows it to be set for nearly any wide band system available. There are two interface (I/O) ports on the module. Either one can be connected to the gauge system or to another module, allowing several units to be daisy chained together. Do not connect the I/O port to anything other than a Dakota Digital gauge or BIM. Do not mount the module in the engine compartment; it should be mounted in interior of the vehicle. Each unit connected to the bus needs a unique ID number assigned to it. The unit comes preset with an ID value that should not conflict with any other BIM connected to your system. If needed the ID can be automatically reset to an unused value

Write Your Own Review

Dakota Digital BIM-13-2 Wideband Air and Fuel Expansion Module

Dakota Digital BIM-13-2 Wideband Air and Fuel Expansion Module

**BIM-13-2 Supersedes the BIM-13-1

IS YOUR HOTROD ADDICTED TO INFORMATION?1

This Bus Interface Module has one input to monitor the air/fuel ratio output from a wide band air/fuel controller with an

analog voltage output. It is programmable to provide either an air/fuel ratio display or a lambda display. The module can

be programmed to work with different scaling values of a voltage between 0 – 5 volts. This allows it to be set for nearly any wide band system available.

There are two interface (I/O) ports on the module. Either one can be connected to the

gauge system or to another module, allowing several units to be daisy chained together. Do not connect the I/O port to anything other than a Dakota Digital gauge or BIM.

Do not mount the module in the engine compartment; it should be mounted in interior of the vehicle.

Each unit connected to the bus needs a unique ID number assigned to it. The unit comes preset with an ID value that should not conflict with any other BIM connected to your system.

If needed the ID can be automatically reset to an unused value