Dakota Digital VHX-70D-CLG-S-B Dodge 1970-74 Challenger and Plymouth 1970-74 Cuda with Rallye dash
The new VHX Systems fit directly into the stock instrument bezel of a 1970-1974 Dodge Challenger and Plymouth Cuda with Rallye dash without modification, adding a wealth of features to this iconic vehicle.
1970-1974 Chevy Challenger or Plymouth Cuda VHX Instruments. Silver Alloy/Blue Lighting
Fully lit needles, backlit faces, and highly visible LCD message centers are a few of the things that you can see which set the VHX Series apart from yesterday’s traditional approach to instrumentation. A few of the features which you don’t normally see are the micro-controlled precision stepper motors, solid state sensors for unparalleled accuracy, and user-customizable display feedback, all supported by an unrivaled limited lifetime warranty which has become the standard for Dakota Digital instrumentation systems . Completely engineered and manufactured at our facility in Sioux Falls, South Dakota, the VHX Series has completely revolutionized the instrumentation industry.
VHX Instrument System Features!!!!
Included Senors
Analog Gauges :
Speedometer: 0 -160 MPH (optional metric version 0- 255 km/h).
Tachometer: 0- 8,000 RPM
Oil Pressure: 0-80psi analog and digitally.
Water Temp:100- 260ºF (optional metric version 40- 120ºC)
Voltmeter:9- 17 VDC
Fuel Level:E, 1/4, 1/2, 3/4, F
Lighting: Back lit technology is popular with performance instrumentation due to precise lighting allowing you see what is truly important when you really need it at a quick glance. Each number, tick mark, annunciator, needle, indicator and digital message center is lit by a series of LEDs behind the gauge face.
Digital Message Centers :
Standard Displays:
Odometer (One time user settable, Million Mile)
Dual (A/B) Trip Meter (0- 9,999.9)
Clock (12 hour)
Performance Meters:
0- 60 MPH Timer (0- 100 kmh)
1/4 mile time
1/4 mile end speed (trap speed)
High speed recall
High RPM recall
Gauges:
0- 60 MPH Timer (0- 100 kmh)
Speedometer (0- 255 MPH/kmh)
Tachometer (0- 9,990 RPM)
Oil Pressure (0-100 psi displayed in 1 psi increments)
Water Temperature (100- 300ºF/ 40- 150ºC displayed in 1 ºF/ºC increments)
Voltmeter (9- 17 VDC)
Fuel Level (0-99% full)
Lighting:
Auto-contrasting LCD display for optimal view in the brightest of sunlight.
LED backlit at night to match/ complete the look at night.
Built-in Indicators :
Indicators:
Turn Signals (Left/ Right)
High Beam
Check Engine
Parking Brake
Cruise Control (On/ On & Engaged when vehicle is equipped)
Gear Position (Optional GSS-2000 sensor required)
4 x 4 (When vehicle is equipped)
Wait to Start (When vehicle is equipped)
Water Temperature:
1/8" NPT, ground isolated sensor with a 10 ft harness.
Oil Pressure:
1/8" NPT solid state sensor with a 10 ft harness.
Cable Driven Speed Sensor/ Generator:
Replaces GM style speedometer cables with a 10 ft harness. (Tremec and Ford style adaptors available on request.).
Bushings:
Each kit comes with 1/8" to 1/4", 3/8" and 1/2" NPT bushings along with bushings for 12mm and 16mm x 1.5 threads.
Calibration :
Pushbutton:
Dakota Digital instruments are programmed and operated by the push of a button. Simply mount the included pushbuttons supplied with your gauges in a convenient and easily accessible location. These buttons are used to calibrate your speedometer, set the cylinder count and the fuel level gauge. Once properly configured these same buttons are used to access the wealth of information located in the Digital Message Centers.
** Covered by a Limited Lifetime Warranty!
More Information
year make model
1970-1974 Dodge Challenger / Plymouth Cuda with Rallye dash
Manufacturer
DAKOTA DIGITAL
Write Your Own Review
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.