Dakota Digital BIM-03-2 Pressure Module

Name: Dakota Digital BIM-03-2 Pressure Module
SKU: BIM-03-2
Price: 80.7 USD
Availability: InStock

Be the first to review this product

Special Price $80.70 Regular Price $84.95

SKU

BIM-03-2

Dakota Digital BIM-03-2 Pressure Module

This Bus Interface Module connects to a solid state pressure sensor.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

The BIM-03-2 is pressure module that allows you to display an additional pressure reading within your RTX, HDX, VHX and VFD3 (rev G) gauges. The BIM-03-2 is designed for Solid State Pressure senders , providing you phenomenal accuracy (*see resolutions in the chart below).

Pressure Inputs:

Pressure (generic fluid or air)
Fuel Pressure
Air Pressure
Boost/Vacuum
NOS Pressure

*The BIM-03-2 is designed to supply information to the compatible Dakota Digital VHX, HDX, RTX and VFD3 instrument systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.

** BIM-03-2 Supersedes BIM-03-1

For Diesel Fuel Pressure Applications:

High pressure spikes found in many diesel applications can drastically shorten the lifespan of a sending unit.

In order to protect the sensor from these damaging spikes, a snubber adaptor should be added before the sensor.

More Information
year make model	The BIM-03-2 is pressure module that allows you to display an additional pressure reading within your RTX, HDX, VHX and VFD3 (rev G) gauges.
Manufacturer	DAKOTA DIGITAL
More Info	This Bus Interface Module connects to a solid state pressure sensor. There are two power & data interface (I/O) ports on the module. Either one can be connected to the gauge system or to another module, allowing several units to be daisy chained together. Do not connect the I/O port to anything other than a Dakota Digital gauge or BIM. Do not mount the module in the engine compartment; it should be mounted in interior of the vehicle. Each unit connected to the bus needs a unique ID number assigned to it. The unit comes preset with an ID value that should not conflict with any other BIM connected to your system. If needed the ID can be automatically reset to an unused value. The factory default label is PSI, but this can be changed in the gauge setup. Labels available for each input are: PSI - generic pressure input. This will display PSI x, Px, or PRESSURE CHx where x is a number from 1 – 8 corresponding to the module ID number. ID’s over 8 will start over at 1. FUEL - fuel pressure input. This will display FUEL P, FP, or FUEL PRESSURE. AIR - air pressure input. This will display AIR P, AP, or AIR PRESSURE. BOOST - vacuum/boost input. This will display BOOST, BP, or VAC / BOOST. NOS - nitrous oxide pressure input. This will display NOS P, NP, or NOS PRESSURE

Write Your Own Review

Dakota Digital BIM-03-2 Pressure Module

Dakota Digital BIM-03-2 Pressure Module

This Bus Interface Module connects to a solid state pressure sensor.

This Bus Interface Module connects to a solid state pressure sensor. There are two power & data interface (I/O) ports on the module.

Either one can be connected to the gauge system or to another module, allowing several units to be daisy chained together.

Do not connect the I/O port to anything other than a Dakota Digital gauge or BIM.

Do not mount the module in the engine compartment; it should be mounted in interior of the vehicle.

Each unit connected to the bus needs a unique ID number assigned to it. The unit comes preset with an ID value that should not conflict with any other BIM connected to your system.

If needed the ID can be automatically reset to an unused value.

The factory default label is PSI, but this can be changed in the gauge setup.Labels available for each input are:PSI - generic pressure input.

This will display PSI x, Px, or PRESSURE CHx where x is a number from 1 – 8 corresponding to the module ID number.

ID’s over 8 will start over at 1.

FUEL - fuel pressure input. This will display FUEL P, FP, or FUEL PRESSURE.

AIR - air pressure input. This will display AIR P, AP, or AIR PRESSURE.

BOOST - vacuum/boost input. This will display BOOST, BP, or VAC / BOOST.

NOS - nitrous oxide pressure input. This will display NOS P, NP, or NOS PRESSURE

The factory default label is PSI, but this can be changed in the gauge setup.
Labels available for each input are:
PSI - generic pressure input.

This will display PSI x, Px, or PRESSURE CHx where x is a number from 1 – 8
corresponding to the module ID number.