Dakota Digital BIM-01-2-MEGA Expansion EFI Interface
Dakota Digital BIM-01-2-MEGA Expansion EFI Interface
Dakota Digital is proud to introduce the BIM Expansion modules for Dakota Digital RTX, HDX, VHX and VFD3 instrument systems. The Dakota Digital BIM-series modules allow you to add up to an additional 16 gauges, that's right we said SIXTEEN specialty gauge readings, to your vehicle without cutting extra holes in the dash or installing pillar and pod mounts in your interior.
The BIM-01-2-MEGA is designed to read the engine information from the MegaSquirt EFI kits.
The BIM-01-2-MEGA module is a direct plug in using the supplied harness for simple connection to the CAN H and CAN L connectors on the MegaSquirt EFI systems. Compatible with the following MegaSquirt EFI systems:
MegaSquirt-2 MicroSquirt MSPNP2 MicroSquirt-module based ECU's w/ firmware MS2/Extra 3.4.0 or later. MegaSquirt-3 MS3-Pro MS3-Gold MSPSP-Pro MS3-Pro-module based ECU's w/ firmware MS3 1.4.0 or later.
The BIM-01-2-MEGA will collect and output the following information to Dakota Digital Instrument Systems The BIM-01-2-MEGA will collect and output the following available (depending upon MegaSquirt application and add-ons selected) readings to Dakota Digital Instrument Systems
Speedometer Tachometer Water Temperature Oil Pressure Fuel Pressure A/F Ratio Intake Air Temperature Boost Dakota Digital cannot guarantee the presence or accuracy of the Coolant Temp., Intake Temp., Fuel Pressure Pressure, or Air/ Fuel ratio displays since this is a function of the ECM and matching OEM functional sensors.
*The BIM-01-2-MEGA is designed to decode the information provided by the MegaSquirt-2, MicroSquirt, MSPNP2, MicroSquirt-module based ECUs with firmware MS2/Extra 3.4.0 or later, MegaSquirt-3, MS3-Pro, MS3-Gold, MSPNP-Pro, MS3-Pro-module based ECUs with firmware MS3 1.4.0 or later.
***Compatible Dakota Digital instrument system: VHX, HDX, RTX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.
year make model | The BIM-01-2-MEGA is designed to decode the information provided by the MegaSquirt-2, MicroSquirt, MSPNP2, MicroSquirt-module based ECUs with firmware MS2/Extra 3.4.0 or later, MegaSquirt-3, MS3-Pro, MS3-Gold, MSPNP-Pro, MS3-Pro-module based ECU |
---|---|
Manufacturer | DAKOTA DIGITAL |
More Info |
The BIM-01-2-MEGA is designed to read the engine information from the MegaSquirt EFI kits. The BIM-01-2-MEGA module is a direct plug in using the supplied harness for simple connection to the CAN H and CAN L connectors on the MegaSquirt EFI systems. Compatible with the following MegaSquirt EFI systems:
The BIM-01-2-MEGA will collect and output the following information to Dakota Digital Instrument Systems *: The BIM-01-2-MEGA will collect and output the following available (depending upon MegaSquirt application and add-ons selected) readings to Dakota Digital Instrument Systems*:
Dakota Digital cannot guarantee the presence or accuracy of the Coolant Temp., Intake Temp., Fuel Pressure Pressure, or Air/ Fuel ratio displays since this is a function of the ECM and matching OEM functional sensors. *The BIM-01-2-MEGA is designed to decode the information provided by the MegaSquirt-2, MicroSquirt, MSPNP2, MicroSquirt-module based ECUs with firmware MS2/Extra 3.4.0 or later, MegaSquirt-3, MS3-Pro, MS3-Gold, MSPNP-Pro, MS3-Pro-module based ECUs with firmware MS3 1.4.0 or later. **Compatible Dakota Digital instrument system: VHX, HDX, RTX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.
|