Dakota Digital BIM-01-2-EDBK Interface Edelbrock Module
Dakota Digital BIM-01-2-EDBK Interface Edelbrock Module
This unit is plug-and-play. Attach the included DB9-harness to your Edelbrock EFI system. No further setup is required.
The BIM-01-2-EDBK is designed to read the engine information from the Pro-Flo 4 EFI kits. The BIM-01-2-EDBK module is connected to the Edelbrock device through the dedicated DB9 CAN connection plug on the main harness.
The BIM-01-2-EDBK will collect and output the following information to Dakota Digital Instrument Systems:
Tachometer
Water Temperature
Intake Air Temperature
Fuel Pressure
A/F Ratio
MAP
Boost (when applicable)
*Dakota Digital cannot guarantee the presence or accuracy of the Coolant Temp., Intake Temp., Fuel Pressure, or Air/ Fuel ratio displays since this is a function of the ECM and matching OEM functional sensors.
**Compatible Dakota Digital instrument system: VHX, HDX, RTX and VFD3 systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.
| year make model | Edelbrock Interface Module The BIM-01-2-EDBK is designed to read the engine information from the Pro-Flo 4 EFI kits. |
|---|---|
| Manufacturer | DAKOTA DIGITAL |
| More Info |
This Bus Interface Module is designed to read engine information from specific Edelbrock CAN bus enabled EFI units
Pro-Flo 4 EFI system with v53 or later. The module is connected to the Edelbrock device main There are two interface (I/O) ports on the module. Either one can be connected to the gauge system or to another Do not connect the I/O port to anything other than a Dakota Do not mount the module in the engine compartment; it should be mounted in interior of the vehicle. The engine and transmission information that is available from the unit depends on the Edelbrock module programming The possible values are: engine RPM, engine coolant temperature, intake/manifold air temperature, fuel Available readings: Engine RPM, Engine coolant temperature, Intake/manifold air temperature, Fuel pressure, A/F Ratio, MAP and boost |