Dakota Digital BIM-05-1 Volt and Current Expansion Module
Special Price
$99.70
Regular Price
$104.95
SKU
BIM-05-1
Dakota Digital BIM-05-1 Volt and Current Expansion Module
***IS YOUR HOTROD ADDICTED TO INFORMATION?!?!***
SPEEDSHOPSTORE.COM IS A DISTRIBURTOR OF BRANDS SUCH AS DAKOTA DIGITAL PRODUCTS
WELL HOOK UP YOUR RIDE WITH DAKOTA DIGITAL BIM EFI INTERFACE MODULE, SO THAT MONSTER WILL HAVE ENOUGH INFORMATION TO KEEP IT A DREAM MACHINE. UNLESS ITS ALWAYS HUNGRY FOR MORE!!!!!!!!!!
The BIM-05-1 allows the Dakota Digital RTX, HDX, VHX and VFD systems to display up to 2 additional Volt or 2 Current or a combination of 1 Volt and 1 Current readings.
*The BIM-05-1 is designed to supply information to the VHX, HDX, RTX and VFD systems with a black plastic control module. For any BIM-compatible control boxes which contain the 3.5mm headphone jack BIM input, add part number 394193 adaptor harness. Earlier instrument systems with an aluminum control module are not capable of BIM connectivity.
year make model | Any year that supports Dakota Digital gauge instrument systems. daisy chain The labels and warning points are set up through the gauge display system. Only VFD3/3X controls with a plastic case support adding BIM’s. For VFD3, VFD3X, and VHX systems |
---|---|
Manufacturer | DAKOTA DIGITAL |
More Info | This Bus Interface Module has inputs for up to two devices to be monitored. Each channel can be configured ndividually.
There are two interface (I/O) ports on the module. Either one can be connected to the gauge system or to another module, allowing several units to be daisy chained together.
*Do not connect the I/O port to anything other than a Dakota Digital gauge or BIM. Do not mount the module in the engine compartment; it should be mounted in interior of the vehicle. Each sensor connected to the bus needs a unique ID number assigned to it.
This module has inputs for two channels so it can use one or two ID numbers. Each of the two channels can be assigned an ID from 1 – 16, or turned off.
The factory default ID numbers are 3 and 4 for the two inputs respectively. The factory default labels are VOLTS for both.
|
Write Your Own Review