Tanks Inc PA-TBI-P Series Fuel Injection In Tank Pump Kit For GM TBI
Tanks Inc PA-TBI-P Series Fuel Injection In Tank Universal Pump Kit for GM Throttle Body Injected Engines with TANK'S Poly Tanks - 109 Liter Per Hour Pump
Convert Your Carbureted Fuel Tank To Fuel Injection!
In-Tank Fuel Pump Module - PA-Series
This kit gives you everything that you need to install an internal fuel pump into nearly any tank.
The PA Series fuel pump kit features a reservoir tray that eliminates fuel pump starvation that is common on non-baffled tanks. Â
A properly installed internal fuel pump will essentially eliminate any issues that are common on external fuel pumps such as vapor lock and cavitation.
Â
Note:Â Our kits do not include fuel pressure regulators.
Note:Â Â All flow rates are rated at 13.5 volts.
Note:Â Assembly requires a minimum tank depth of 6 inches.
Note:Â Â Maximum tank depth of 10.5 inches with no modification.
This Fuel Pump Kit Is For Throttle Body Injection Â
 In-Tank Fuel Pump Module - PA-Series PA-TBI-P For Throttle Body InjectionÂ
- Â
- Made in the USA
- You assemble to the depth of your tank and install
- All Metal Components are Heavy Gauge (Yellow Zinc Plated Steel)
- Reservoir Tray Included
- 1/4" NPT Supply Line
- 1/4" NPT Return Line
- 1/4" NPT Vent Opening
- In-Tank Fuel Pump Wiring Harness
- Up to 100 PSI Rating
- Threaded Heavy Gauge In-Tank Mounting Ring
- Heavy Gauge Mounting Plate
- Adjustable Height Support ArmÂ
- Genuine Walbro Fuel Pumps are supplied
Pump Flow Rates:
TBI (For OE GM)Â 109 Liter Per Hour Pump
- 29 GPH @ 12 PSI
 PA-2  Deluxe 190 Liter Per Hour Pump                Â
- 54 GPH @ 40 PSIÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
- 50 GPH @ 50 PSI
- 48 GPH @ 60 PSI
PA-4 Â High Flow 250 Liter Per Hour Pump
- 68 GPH @ 40 PSI
- 65 GPH @ 50 PSI
- 62 GPH @ 60 PSI
PA-6  High Performance 400Liter Per Hour Pump (500 - 1000 Horsepower)
- 106Â GPH @ 40 PSI
- 99Â Â GPH @ 50 PSI
- 91Â Â GPH @ 60 PSI
NOTE:Â All Flow Rates Are At 13.5 Volts
   The PA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.
    We use high-performance pumps in all of our fuel injection modules, and we offer four different operating ranges in order to supply up to approximately 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)
   The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.
| year make model | Universal |
|---|---|
| Manufacturer | TANKS INC. |