FiTech Go EFI 4 30005 EFI 600 HP System
FiTech Go Street 30005 EFI 600 HP System
Inject Your Classic Car!
CALL FOR PROMO CODE DISCOUNT
(800) 407-9112
The Go EFI 4 Self Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday Driver right up to your weekend Street Machine or Bracket Racer.
It features the FASTEST most accurate Self Learning available, Timing control, Wet flow Annular discharge and tons of additional features.
When it comes to fuel injection versus carburetors, new school is just too cool. FiTech Go EFI 4 600 hp self-tuning fuel injection systems have the ECU mounted on the throttle body for greater self-containment, clean installation, and easy setup.
These trick systems fit any 4-barrel intake manifold and are designed for use on engines from 250 to 600 hp. They feature a built-in fuel pressure regulator and an ECU that self-adjusts to find the best tune, and self-adjusts to it--and the ability to change air/fuel ratios and ignition timing on the fly.
FiTech Go Street 30005 EFI 600 HP System
It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation.
No hole in your firewall and no unsightly harness draped across your engine. This is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. It also has a built-in fuel pressure regulator. A hand-held controller features a touch screen for quick and easy initial set-up.
Note that this EFI system can also be used with an engine compartment mounted Fuel Command Center, which provides a returnless system. See Command Center details in the description below
A List of features
A List of features of the Go EFI 4 – 600 HP System:
- (4) Hi-Flow 600 HP injectors.
- Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes.
- Self-tuning** After startup the ECU immediately takes over and provides your vehicle with an optimum tune!
- Basic install can be done with just 4 wires and 2 sensors to install.
- Uses a Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts.
- The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat.
- Throttle bodies have a completely universal base to fit any 4-bbl manifold.
- Throttle Linkage suits most transmissions.
- Choice of three fuel inlet connections.
- All Go-EFI’s feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing!
- Go-EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION!! Check out our videos, you need to see it.
- Ignition timing can be controlled and adjusted on the fly from your touch screen controller.
- Air Fuel ratios can be optimized on the fly as you drive! Try that with your Carb.
- Part #30001 & #30002 feature 1 adjustable fan control switch.
- Will work with CDI box but not required to control timing.
- Built in Fuel pressure regulator. No extra regulator to mount on your fire wall.
- Use of ignition timing control is optional and not required.
- Ignition timing control does not learn, and requires synchronizing distributor to engine with a timing light.
Each system has a hand-held controller with a touch screen for initial setup, throttle linkage that suits most transmissions, and is manufactured with OE engineering. FiTech Go EFI 4 600 hp self-tuning fuel injection systems leave the guesswork behind.
Additional features:
* Choice of three fuel inlet connections
* Will work with CDI box, but not required to control timing
* Adjustable fan control switch
* Can be used with an engine-mounted returnless fuel command center
* Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors
* Wet Flow swirl spray annual discharge obtains complete atomization
* Voltage-controlling fuel pump control reduces power under low loads to lower temperatures
* Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor
* Designed for applications making at least 6 inches of vacuum at idle
year make model | Universal |
---|---|
Manufacturer | FiTech |
More Info |
Quick Start Guide Handheld Controller
|