Tanks Inc TM202-T FI Tank 75-79 Ventura, Phoenix, Nova, Skylark

TANKS, INC. has been a leader in the street rod industry, receiving various awards for safety and innovation. In addition, it was the first to introduce style into street rod gas tanks; radiused edges, die-stamped openings, flush-mounted fittings, indented panels and slotted mounting flanges, just to name a few.

• 1975-1979 Chevy Nova, Buick Skylark, Oldsmobile Omega, 75-77 Ventura, and 75-79 Pheonix  EFI Fuel Tank
• Fuel Injection Ready!
• Uses our GPA series fuel pumps, available in 5 sizes.
• Uses aftermarket 5-bolt senders.  Multiple Ohm ranges available to work with factory or aftermarket gauges.
• EFI style internal baffling.  Extra Large 4.3 liter internal fuel tray to prevent fuel pump starvation. 
• Perfect for your Pro-Touring, Autocross or Road Racing Ride
• Fuel pump and sender are recessed in the tank for easy installation with no modification needed to your car.
• Looks like an OE tank when installed.
• Coated galvanized steel then Powder Coated Silver.
• 21 Gallon Capacity
• Size is: 39-5/8" x 21-1/4" x 10-1/4"

 In-Tank Fuel Pump Module - GPA-Series

For a complete setup simply choose a GPA fuel pump and fuel sending unit.

• Made in the USA
• Heavy 10 gauge no-warp mounting plate
• 1/4" NPT Supply and Return Line
• Barbed Vent Fitting
• Oven brazed fittings
• 40-100 PSI
• In-tank wire harness
• Genuine Walbro Fuel Pumps

    The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.

     We use Walbro high-performance pumps in all of our fuel injection modules, and we offer four different operating ranges in order to supply up to approximately 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)

    The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector.  It is yellow-zinc plated to prevent corrosion.