Tanks Inc. B1-D Buick Universal 1941-54 Fuel Tank
Tanks Inc. B1-D Buick Universal 1941-54 Fuel Tank
1941-54 GM Fuel Tanks - Fits Many Models
B1-D Overall Size: Overall size: 31-1/2"W x 27-1/2"L x 7-1/2"D
Filler Neck Is On The 27 1/2" Side , That Is The Drivers Side .
There Are 4 Different Filler Neck Locations Look At The Picture In More Information And Tell Us Which One It Is Please
This is a carbureted tank can be converted to fuel injection buy the fuel pump kit and cut the tank and install it
TANKS, INC. has been a leader in the street rod industry, receiving various awards for safety and innovation. In addition, it was the first to introduce style into street rod gas tanks; radiused edges, die-stamped openings, flush-mounted fittings, indented panels and slotted mounting flanges, just to name a few.
It was also the first on the block with a true reproduction Deuce tank, though many had tried and failed.
Their exclusive "Baffle-Tunnel" made polyethylene gas tanks a viable choice for the rodder. To top it off, the company
- Overall size: 31-1/2"W x 27-1/2"L x 7-1/2"D
- 17 Gallon Capacity
- Fully Baffled Fuel Tank
- Mounts with Standard Mounting Straps
- Filler Neck and 2-1/4" ID Connecting Hose Included
- Accepts All Stock GM type Sending Units
- Made from Galvanneal Steel. Coated at the Steel Mill for Maximum Rust Protection
- Primer Painted
Tank’s, Inc. B1 series of tanks are available in 4 models that are basically the same with the exception of the filler neck location These tanks fit a wide range of cars in the 1941-54 Buick, Pontiac, Oldsmobile and more vintage models. Although they may not be an exact replacement with slight to no modification they will work in many GM applications where a 0-30 Ohm fuel sender is used.
In-Tank Fuel Pump Module - GPA-Series
- Made in the USA
- Heavy 10 gauge no-warp mounting plate
- 1/4" NPT Supply and Return Line
- Barbed Vent Fitting
- Oven brazed fittings
- 40-100 PSI
- In-tank wire harness
- Genuine Walbro Fuel Pumps
-
Pump Flow Rates:
TBI 109 Liter Per Hour Pump
- 29 GPH @ 12 PSI
PA-2 Deluxe 190 Liter Per Hour Pump
- 54 GPH @ 40 PSI
- 50 GPH @ 50 PSI
- 48 GPH @ 60 PSI
PA-4 High Flow 250 Liter Per Hour Pump
- 68 GPH @ 40 PSI
- 65 GPH @ 50 PSI
- 62 GPH @ 60 PSI
PA-6 High Performance 400Liter Per Hour Pump (500 - 1000 Horsepower)
- 106 GPH @ 40 PSI
- 99 GPH @ 50 PSI
- 91 GPH @ 60 PSI
NOTE: All Flow Rates Are At 13.5 Volts
The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.
We use Walbro high-performance pumps in all of our fuel injection modules, and we offer four different operating ranges in order to supply up to approximately 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)
The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.
year make model | Universal |
---|---|
Manufacturer | TANKS INC. |
More Info |