TANKS, INC. has been a leader in the street rod industry, receiving various awards for safety and innovation. In addition, it was the first to introduce style into street rod gas tanks; radiused edges, die-stamped openings, flush-mounted fittings, indented panels and slotted mounting flanges, just to name a few.
It was also the first on the block with a true reproduction Deuce tank, though many had tried and failed.
Their exclusive "Baffle-Tunnel" made polyethylene gas tanks a viable choice for the rodder. To top it off, the company holds three patents in the automotive field, two of them for gas tanks
1955-56 Chevy Bel Air
Fits: Bel Air Nomad, 150, and 210 series Station Wagon and Sedan Delivery models
Does Not Fit 9-Passenger Wagons
17 Gallons
34-1/8" x 17-1/2" x 13-1/2"
With Drain Plug
In-Tank Fuel Pump Module-PA-Series
From Tanks, Inc.
For over 20 years Tanks Inc has been retrofitting non EFI gas tanks with internal fuel pumps using their PA Series EFI Gas Tank Conversion Module. This In-Tank Fuel Pump module can be used to retrofit an internal fuel pump into your original gas tank.
This kit gives you everything that you need to install an internal fuel pump into nearly any tank. The PA Series fuel pump kit features a reservoir tray that eliminates fuel pump starvation that is common on non-baffled tanks. A properly installed internal fuel pump will essentially eliminate any issues that are common on external fuel pumps such as vapor lock and cavitation.
The pumps listed are capable of running up to 100 PSI and they will deliver a varying amount of fuel (gallons per hour) depending on the pressure. We have recorded the GPH at 30, 40, and 60 PSI as a guide to finding the correct pump for your particular installation. In addition, you can use the following list as a general rule of thumb for some of the more common engine swaps. See below for Installation Instructions.
Note: "TANKS" 35M, 37M, and U-T poly tanks do not require the "P" suffix.
Note: Our kits do not include fuel pressure regulators.
Note: All flow rates are rated at 13.5 volts.
Note: Assembly requires a minimum tank depth of 6 inches.
Note: Maximum tank depth of 10.5 inches with no modification.
You assemble to the depth of your tank and install
All Metal Components are Heavy Gauge (Yellow Zinc Plated Steel)
Reservoir Tray Included
1/4" NPT Supply Line
1/4" NPT Return Line
1/4" NPT Vent Opening
In-Tank Fuel Pump Wiring Harness
Up to 100 PSI Rating
Threaded Heavy Gauge In-Tank Mounting Ring
Heavy Gauge Mounting Plate
Adjustable Height Support Arm
Genuine WalbroFuel Pumps are supplied
Pump Flow Rates:
TBI 109 Liter Per Hour Pump
29 GPH @ 12 PSI
PA-2 Deluxe 190 Liter Per Hour Pump
54 GPH @ 40 PSI
50 GPH @ 50 PSI
48 GPH @ 60 PSI
PA-4 High Flow 250 Liter Per Hour Pump
68 GPH @ 40 PSI
65 GPH @ 50 PSI
62 GPH @ 60 PSI
PA-6 High Performance 400Liter Per Hour Pump (500 - 1000 Horsepower)
