Tanks Inc. TM53B Chevy 1969-70 Bel Air Fuel Tank
Tanks Inc. TM53B Chevy 1969-70 Bel Air Fuel Tank
TM53B Is A Direct Fit For
- 1969-70 Chevy Bel Air, Impala, and Biscayne Gas Tank
This is the best choice for adding a fuel ready tank to your classic vehicle! Universal tanks are also available for totally custom applications.
This Is A Carbureted Tank That Can Be Converted To Fuel Injection Tank By Adding the Fuel Pump Kit Below Cutting The Tank And Installing The Pump Kit
TANKS, INC. has been a leader in the street rod industry, receiving various awards for safety and innovation. In addition, it was the first to introduce style into street rod gas tanks; radiused edges, die-stamped openings, flush-mounted fittings, indented panels and slotted mounting flanges, just to name a few.
It was also the first on the block with a true reproduction Deuce tank, though many had tried and failed.
Their exclusive "Baffle-Tunnel" made polyethylene gas tanks a viable choice for the rodder. To top it off, the company holds three patents in the automotive field, two of them for gas tanks
- 1965-66 Chevrolet Impala, Bel Air, Biscayne, and Caprice Fuel Tank
- Fuel Tank Capacity is 20 Gallon
- With Filler Neck
- With Vent Pipe
- Overall size is: 37-1/4" x 30" x 6-3/4"
- Gas Tank also sold as GM37C
|
In-Tank Fuel Pump Module-PA-GPA
From Tanks, Inc.- Made in the USA
- Heavy 10 gauge no-warp mounting plate
- 1/4" NPT Supply and Return Line
- Barbed Vent Fitting
- Oven brazed fittings
- 40-100 PSI
- In-tank wire harness
- Genuine Walbro Fuel Pumps
Pump Flow Rates:
TBI 109 Liter Per Hour Pump
29 GPH @ 12 PSI
PA-2 Deluxe 190 Liter Per Hour Pump
54 GPH @ 40 PSI
50 GPH @ 50 PSI
48 GPH @ 60 PSI
PA-4 High Flow 250 Liter Per Hour Pump
68 GPH @ 40 PSI
65 GPH @ 50 PSI
62 GPH @ 60 PSI
PA-6 High Performance 400 Liter Per Hour Pump (500 - 1000 Horsepower)
106 GPH @ 40 PSI
99 GPH @ 50 PSI
91 GPH @ 60 PSI
NOTE: All Flow Rates Are At 13.5 Volts
The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.
We use Walbro high-performance pumps in all of our fuel injection modules, and we offer four different operating ranges in order to supply up to approximately 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)
The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.
year make model | 1969-1970 Chevy Bel Air, Impala, Biscayne, Caprice |
---|---|
Manufacturer | TANKS INC. |