Tanks Inc. TM31 Chevy 1961-1964 Fuel Gas Tank
Tanks Inc. TM31 Chevy 1961-1964 Fuel Gas Tank
For Carburation but can be converted to fuel injection
TM31 Size is: 38" x 15-1/8" x 11-1/8"
GET A New Fuel Tank YOUR CLASSIC HOTROD!!
Tanks, Inc. carries a wide veriety of fuel ready tanks with built in trays and appropriate fittings. These are original-fit tanks and require no modifications to mount.
This is the best choice for adding a fuel ready tank to your classic vehicle! Universal tanks are also available for totally custom applications.
Tanks Inc. Now Has A Fuel Pump To Make Your Tank A Fuel Injected Tank . Simply Pick The PA fuel Pump Below That Matches Your Horsepower And Add It To The Purchase .
With fuel pump options Below You Can Feed Fuel For up to 1000 horsepower!
Tanks has you covered for your next EFI swap
You will have to cut and fit our pump to this tank.
This Is A Carbureted Tank That Can Be Converted To Fuel Injection Tank By Adding the Fuel Pump Kit Below
TANKS, INC. has been a leader in the street rod industry, receiving various awards for safety and innovation. In addition, it was the first to introduce style into street rod gas tanks; radiused edges, die-stamped openings, flush-mounted fittings, indented panels and slotted mounting flanges, just to name a few.
It was also the first on the block with a true reproduction Deuce tank, though many had tried and failed.
Their exclusive "Baffle-Tunnel" made polyethylene gas tanks a viable choice for the rodder. To top it off, the company holds three patents in the automotive field, two of them for gas tanks.
- 1961-1964 Chevy EFI Fuel Tank
- Fits: Bel Air, Biscayne and Impala
- Uses our GPA series fuel pumps, available in 5 sizes.
- Uses aftermarket 5-bolt senders. Multiple Ohm ranges available to work with factory or aftermarket gauges.
- Fuel pump and sender are recessed in the tank for easy installation with no modification needed to your car.
- Looks like an OE tank when installed.
- Coated galvanized steel then Powder Coated Silver.
- 20 Gallon Capacity
- Size is: 38" x 15-1/8" x 11-1/8"
For a complete setup simply choose a GPA fuel pump and fuel sending unit.
|
In-Tank Fuel Pump Module - GPA-Series
From Tanks, Inc.
- Made in the USA
- Heavy 10 gauge no-warp mounting plate
- 1/4" NPT Supply and Return Line
- Barbed Vent Fitting
- Oven brazed fittings
- 40-100 PSI
- In-tank wire harness
- Genuine Walbro Fuel Pumps
The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.
We use Walbro high-performance pumps in all of our fuel injection modules, and we offer four different operating ranges in order to supply up to approximately 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)
The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.
year make model | 1961-1964 Chevy Bel Air, Biscayne and Impala |
---|---|
Manufacturer | TANKS INC. |