SS carries a wide veriety of fuel ready tanks with built in trays and appropriate fittings. These are original-fit tanks and require no modifications to mount.

This is the best choice for adding a fuel ready tank to your classic vehicle! Universal tanks are also available for totally custom applications.

You Can Turn This Fuel Tank Into A Fuel Injection Tank Just Add The fuel Pump Conversion Kit

In-Tank Fuel Pump Module-PA-Series

From Tanks, Inc.

For over 20 years Tanks Inc has been retrofitting non EFI gas tanks with internal fuel pumps using their PA Series EFI Gas Tank Conversion Module. This In-Tank Fuel Pump module can be used to retrofit an internal fuel pump into your original gas tank.

This kit gives you everything that you need to install an internal fuel pump into nearly any tank. The PA Series fuel pump kit features a reservoir tray that eliminates fuel pump starvation that is common on non-baffled tanks. A properly installed internal fuel pump will essentially eliminate any issues that are common on external fuel pumps such as vapor lock and cavitation.

The pumps listed are capable of running up to 100 PSI and they will deliver a varying amount of fuel (gallons per hour) depending on the pressure. We have recorded the GPH at 30, 40, and 60 PSI as a guide to finding the correct pump for your particular installation. In addition, you can use the following list as a general rule of thumb for some of the more common engine swaps. See below for Installation Instructions.

Note: "TANKS" 35M, 37M, and U-T poly tanks do not require the "P" suffix.

Note: Our kits do not include fuel pressure regulators.

Note: All flow rates are rated at 13.5 volts.

Note: Assembly requires a minimum tank depth of 6 inches.

Note: Maximum tank depth of 10.5 inches with no modification.

You assemble to the depth of your tank and install
All Metal Components are Heavy Gauge (Yellow Zinc Plated Steel)
Reservoir Tray Included
1/4" NPT Supply Line
1/4" NPT Return Line
1/4" NPT Vent Opening
In-Tank Fuel Pump Wiring Harness
Up to 100 PSI Rating
Threaded Heavy Gauge In-Tank Mounting Ring
Heavy Gauge Mounting Plate
Adjustable Height Support Arm
Genuine Walbro Fuel Pumps are supplied

Pump Flow Rates:

TBI 109 Liter Per Hour Pump

29 GPH @ 12 PSI

PA-2 Deluxe 190 Liter Per Hour Pump

54 GPH @ 40 PSI
50 GPH @ 50 PSI
48 GPH @ 60 PSI

PA-4 High Flow 250 Liter Per Hour Pump

68 GPH @ 40 PSI
65 GPH @ 50 PSI
62 GPH @ 60 PSI

PA-6 High Performance 400Liter Per Hour Pump (500 - 1000 Horsepower)

106 GPH @ 40 PSI
99 GPH @ 50 PSI
91 GPH @ 60 PSI

NOTE: All Flow Rates Are At 13.5 Volts

More Information
year make model	1963 Ford Galaxie And Galaxie 500
Manufacturer	SPEED SHOP

Write Your Own Review