Speed Direct 780-47110 Sway Bars Front & Rear 63-82 Corvette
Speed Direct 780-47110 Sway Bars Front & Rear For Shark Bite Suspension 63-82 Corvette
1963-1982 Corvette front & rear anti-sway bar kits come with all hardware for bolt on installation. Includes 1 1/4" front sway bar and 3/4" rear sway bar.
Kits include heavy duty anti-sway bar, , mount brackets, polyurethane bushings and all mounting hardware. Shark Bite Rear sway bar kits also include the mounting plates for attaching to the trailing arm and rear frame assembly - which will allow you to install the sway bar even if your Corvette did not come with a factory rear sway bar.
Made in USA
High Performance 1 1/8" Front and 3/4" Rear Sway Bars
Trying to reduce body roll or replacing a factory anti-sway bar on your 1963-1982 Corvette?
Bolt on a complete new anti-sway bar kit.
Shark Bite Anti-sway bars reduce body roll while cornering and keep your Corvette level throughout the turn.
What is a sway bar?
Sway bars are tuning devices but they do not make up an entire suspension. Suspension geometry, springs, shocks, tire and wheel combination's and driving styles all affect cornering capability and should be addressed accordingly.
Cars with poor handling at high speeds generally have a lot of corner entry understeer. This is generally due to using too soft of a front spring rate. Large sway bars are now installed to reduce body roll and understeer. However, the vehicle will still have some understeer.
So what do you do?
The consensus would be to install a rear sway bar. The rear sway bar will again reduce body roll but will also reduce the amount of traction at the rear. Less traction at the rear allows the car to rotate after the apex (oversteer). The bigger the rear sway bar the less traction during corner exit you will have.
| year make model | Chevy Corvette 1963-1982 |
|---|---|
| Manufacturer | STEEROIDS |