Unisteer 8011530 Corvette 1958-1962 Power Rack and Pinion
Corvette 1958-1962 Power Rack and Pinion Conversion Kit
Tired of your classic Corvette steering like an old pick-up truck? Update your Vette! Replace your worn out steering system with a new rack and pinion kit and have your American Classic steer as sharp as it looks! Engineered to fit the factory suspension, these racks bolt on
Take Control Of Your Corvette!!
Bolting on this kit will make a significant improvement in the overall drivability and responsiveness of your car. The first thing you will notice is the quicker ratio. Stock ratios usually yield between 3.5 or 4 turns lock to lock.
This rack & pinion kit will fit 1958, 1959, 1960, 1961, & 1962 Corvettes. This is a complete power rack and pinion kit. To make the rack fit you will also need a column wich we also sell. To fit your original wheel on the column you will need the steering wheel adaptor.
A 4-way flasher kit is also available to fit your original harness plug into the Ididit harness and to give you 4-way flashers for safety. This kit will work with either original exhaust manifolds or Hooker Competition Headers. Kit comes with everything pictured.
Autocrossing or just fast, mountain road driving becomes a chore with those ratios.Our roadrace kit yields about 2.75 turns lock to lock. Once you get used to the responsiveness of the steering you will notice that your car now drives exactly where you point it.
Roll into a long sweeping corner and the steering wheel can be held in one position. No more of the constant adjustments just to keep the car in the lane. Suddenly your car is driving like a new car and I don’t mean when your car was new. I mean it drives like a 2000 model year car! (At least it steers like one, it won’t fix your stumbling carb or your soft brake pedal)
The kit comes complete with everything you need for installation. . An interesting note, you can run the system without any power assist. Just leave the plugs in the in/out ports. Steering effort is about the same as the stock manual steering box.
Installation is a straightforward process using simple hand tools. The only special tool you need is a pickle fork to remove the tie rods for the steering arm. The whole project takes 3 to 5 hours to complete.
If you really want a precise steering setup, a power rack and pinion offers a 30-year leap forward in steering technology for your Chevy.
Nearly all new cars come equipped with rack and pinion steering. Most people have grown accustom to the feel of it because they drive modern cars to work every day. When you take the fun Chevy out for the weekend you are suddenly and quite literally placed in the 1960’s when steering was as vague as gas prices (nobody was very concerned about either).
A power steering pump is included but you can use your stock pump. An interesting note, you can run the system without any power assist. Just leave the plugs in the in/out ports. Steering effort is about the same as the stock manual steering box. Installation is a straightforward process using simple hand tools. The only special tool you need is a pickle fork to remove the tie rods for the steering arm. The whole project takes 3 to 5 hours to complete.
year make model | 1958-1962 Chevy Corvette C1 |
---|---|
Manufacturer | UNISTEER |