Tanks Inc. TF31A-SS Ford 1955-56 Fuel Tank
Tanks Inc. TF31A-SS Ford Carbureted Fuel Tank
1955-1956 Ford Thunderbird Stainless Steel Fuel Tanks
TF31A-SS Overall Size: 30-1/2" W x 23-1/4" L x 7-1/2"
INJECT YOUR CLASSIC HOTROD!!
This is a carbureted tank, you can convert this to fuel injection, buy one of our conversion pumps ,drill and install .
This is the best choice for adding a fuel injection ready tank to your classic vehicle! Universal tanks are also available for totally custom applications.
TANKS, INC. has been a leader in the street rod industry, receiving various awards for safety and innovation. In addition, it was the first to introduce style into street rod gas tanks; radiused edges, die-stamped openings, flush-mounted fittings, indented panels and slotted mounting flanges, just to name a few.
It was also the first on the block with a true reproduction Deuce tank, though many had tried and failed.
Their exclusive "Baffle-Tunnel" made polyethylene gas tanks a viable choice for the rodder. To top it off, the company
Like Original
- Alloy Coated Powder Coated Steel and Stainless Steel Available
- Made from our Laser Straight Dies the Best in the Industry
- Best Looking Tanks on the Market Today
- Stock Dimensions
- Overall Size: 30-1/2" W x 23-1/4" L x 7-1/2" D
- Stock Capacity
- With a drain plug
- Accepts stock 6-hole Sending Units
- Optional 5-hole Sender Adapter
- This Product is Exclusive to "Tanks", Inc.
- Pressure Tested Underwater for Leaks
- A Smooth Durable Powder Coating after Welding and Testing
- Stainless Steel Tanks are Die Stamped from 304 Stainless
- 1/2" 20 Inverted Flare Fitting for fuel pickup (5/16" Brake/Fuel Line)
In-Tank Fuel Pump Module - GPA-Series
- Made in the USA
- Heavy 10 gauge no-warp mounting plate
- 1/4" NPT Supply and Return Line
- Barbed Vent Fitting
- Oven brazed fittings
- 40-100 PSI
- In-tank wire harness
- Genuine Walbro Fuel Pumps
-
Pump Flow Rates:
TBI 109 Liter Per Hour Pump
- 29 GPH @ 12 PSI
PA-2 Deluxe 190 Liter Per Hour Pump
- 54 GPH @ 40 PSI
- 50 GPH @ 50 PSI
- 48 GPH @ 60 PSI
PA-4 High Flow 250 Liter Per Hour Pump
- 68 GPH @ 40 PSI
- 65 GPH @ 50 PSI
- 62 GPH @ 60 PSI
PA-6 High Performance 400Liter Per Hour Pump (500 - 1000 Horsepower)
- 106 GPH @ 40 PSI
- 99 GPH @ 50 PSI
- 91 GPH @ 60 PSI
NOTE: All Flow Rates Are At 13.5 Volts
The GPA-Series Fuel Pump Module is designed to be used in many of our die-stamped alloy-coated and stainless steel gas tanks that have factory-installed reservoir trays. The tray is an absolute necessity for fuel-injection in order to prevent fuel starvation when accelerating and cornering.
We use Walbro high-performance pumps in all of our fuel injection modules, and we offer four different operating ranges in order to supply up to approximately 1000 horsepower. The internal wiring harness, supply line, return line, filter sock and insulator sleeve are included. (The gasket and screws with o-rings are not included with the pump because we include gaskets and screws with our tanks.)
The heavy 10-gauge no-warp mounting plate contains fittings for the supply, the return, the vent and the electrical connector. It is yellow-zinc plated to prevent corrosion.
year make model | 1955-1956 Ford Thunderbird |
---|---|
Manufacturer | TANKS INC. |
More Info | When purchasing the in tank pump purchase the 1/2 inch gasket that can be used in applications where the mounting surface of the pump is not flat. Gasket can crush and follow the contours of a ribbed or misshaped tank. Because this gasket will crush it is important to slowly torque the bolts down in a star pattern going around the bolt pattern multiple times. includes 16 1 inch screws |